Husqvarna XP+ 2 Stroke Oil 2.6 oz. Bottle 6-Pack

What It Is

This is a 6-pack of Husqvarna XP+ 2-stroke oil, each 2.6 oz. bottle pre-measured for one tank of fuel. Designed for air-cooled, high-performance 2-stroke engines in Husqvarna, Jonsered, and other brands’ handheld equipment (chainsaws, trimmers, blowers, hedge trimmers).

Fitment & Compatibility

• Engine type: Only for 2-stroke, air-cooled engines. Not for 4-stroke or water-cooled engines.
• Mix ratio: XP+ is formulated for 50:1 (2.6 oz. per 1 gallon of unleaded gasoline). Do not use with 40:1 or 32:1 engines unless you adjust mix (check your owner’s manual).
• Brand: Designed for Husqvarna, but works with any brand’s 2-stroke equipment that requires ISO-L-EGD or JASO FD-rated oil (e.g., Stihl, Echo, Ryobi, Poulan). Not OEM-specific.
• Volume: Each bottle treats 1 gallon. For smaller tanks (e.g., 0.5 gal), use half a bottle; for larger tanks (e.g., 2 gal), use two bottles.
• Check before buying: Verify your engine’s required mix ratio (stamped near fuel cap or in manual). If it’s 50:1, this is ready to pour. If it’s 40:1, do not use this oil at full strength.

Key Things to Know

• Quality: XP+ is a full-synthetic, low-smoke, high-detergent oil. It exceeds JASO FD and ISO-L-EGD standards—good for preventing carbon buildup and extending engine life.
• Installation difficulty: Trivial. Pour one bottle into 1 gallon of fresh unleaded gasoline (87 octane or higher), shake, and fill your tank. No measuring needed.
• Common gotchas:
  • Do not mix with ethanol-blended fuel over E10. E15 or E85 can damage seals and cause poor lubrication.
  • This is a 6-pack of single-use bottles—no resealable cap. Use the entire bottle per gallon; don’t try to save half.
  • If your equipment is old or has a rich-running carburetor, the low-smoke formula may still produce some smoke on start-up—this is normal.

Should You Buy It

Buy this if you own one or more 2-stroke Husqvarna (or compatible) tools and want a convenient, no-measure, high-performance oil that reduces smoke and engine deposits. It’s ideal for regular maintenance on chainsaws, trimmers, and blowers, especially if you value simplicity and OEM-grade protection. Avoid if your engine requires a different mix ratio (e.g., 40:1) or if you need a bulk bottle for multiple gallons.