fascinatte 120-6244 Traction Cable for Toro TimeMaster 30in 20199 20200 20975 20977 Lawn Mower

What It Is

This is a replacement traction drive cable for Toro TimeMaster 30in mowers (models 20199, 20200, 20975, 20977). It disengages the self-propel drive when you release the handle bail, and is essential for proper forward motion control.

Fitment & Compatibility

• Exact fit: Toro TimeMaster 30in models 20199, 20200, 20975, 20977 only. Not for other Toro mowers or deck sizes.
• OEM equivalent: This is an aftermarket part matching OEM Toro part 120-6244. Verify your mower’s OEM part number by checking the underside of the mower deck or the owner’s manual.
• Measure before buying: Cable length should be roughly 48 inches (measured end to end including fittings). If your existing cable is longer or shorter, this won’t fit.
• Check cable routing: Confirm your mower has the same routing path (under the handle, along the left side) as the original. Some early 20199 models had minor routing differences.

Key Things to Know

• Installation difficulty: Moderate. You’ll need a 10mm wrench, pliers, and maybe a screwdriver. Expect 30–60 minutes if you’re handy.
• Common gotcha: The cable housing ends are plastic and can crack if over-tightened at the handle bracket. Hand-tighten plus a quarter turn only.
• Quality note: Aftermarket cable may feel slightly stiffer than OEM out of the box. Work the cable back and forth a few times before final installation to loosen it.
• Warranty: No OEM warranty coverage. If you’re still under Toro’s factory warranty, use an official Toro part to avoid voiding it.

Should You Buy It

Buy this if you need an affordable, drop-in replacement for a worn or broken traction cable on a Toro TimeMaster 30in (models 20199, 20200, 20975, 20977) and you’re comfortable with basic mechanical work. Skip it if your mower is under warranty or you need a cable for a different model.