SRRB Direct Low Voltage Replacement Landscape Light Wire Cable Connector 6 Pack for Malibu Paradise Moonrays and More

What It Is

These are low-voltage landscape light wire connectors (6-pack) designed for quick, tool-free splicing of 12-18 AWG outdoor lighting cable. They replace damaged or corroded connectors on Malibu, Paradise, Moonrays, and similar low-voltage landscape lighting systems. Not for lawn mower wiring or engine electrical.

Fitment & Compatibility

• Wire gauge: Works with 12 to 18 AWG low-voltage cable (most common for landscape lights). Check your existing cable’s gauge printed on the jacket.
• Connector type: Direct-bury rated (no need for waterproof tape), but best for above-ground or shallow burial in dry conditions. Not for direct underground splices in wet clay or standing water.
• System voltage: 12V AC/DC only. Do not use on 120V line voltage or mower battery systems.
• Brand fit: Compatible with Malibu, Paradise, Moonrays, Hampton Bay, and most low-voltage landscape lights using standard 2-wire cable. Not for proprietary connectors on some newer LED fixtures (e.g., some Ring or Kichler systems).
• What to measure: Wire insulation outer diameter (not conductor) – these fit cable up to ~0.25″ thick. Measure your wire with calipers if unsure.

Key Things to Know

• No tools needed: Push-in design works with solid or stranded wire, but stranded wire must be twisted tightly before insertion. Loose strands cause intermittent connections.
• Not reusable: Once installed, removal damages the metal insert. Have extras on hand for mistakes.
• Corrosion risk: The rubber seal is decent but not marine-grade. In wet climates, add silicone dielectric grease inside the cap before closing.
• Load limit: Rated for up to 300W total (25A at 12V). Fine for most residential runs, but don’t daisy-chain more than 8-10 lights per connector.

Should You Buy It

If you have a handful of corroded or broken connectors on your 12V landscape lights and want a fast, no-solder fix, this 6-pack is a solid value. But for permanent underground splices or high-moisture areas, spring for waterproof heat-shrink butt connectors instead.