ZALANA Replacement Lawn Mower Mulching Blades Compatible with Toro 20199 20200 22200 22205TE Exmark ECKA30 30 inch Deck Lawnmower - for Timemaster 120-9500-03 116-6358-03 20120P (2 Pack)

What It Is

This is a set of two aftermarket mulching blades designed for 30-inch walk-behind mowers, specifically replacing OEM Toro TimeMaster blades (part numbers 20199, 20200, 22200, 22205TE, 20120P) and Exmark ECKA30 blades. Use it to finely chop grass clippings and return nutrients to the lawn instead of bagging.

Fitment & Compatibility

Before buying, verify these three things:

• Deck size: Only for 30-inch decks. Does not fit 22-inch or 36-inch mowers.
• Model compatibility: Fits Toro TimeMaster models (e.g., 21499, 21500) and some Exmark 30-inch models. Check your mower’s model number against the OEM part numbers listed (20199, 20200, 22200, 22205TE, 20120P). If your mower uses a different OEM blade number, these likely won’t fit.
• Measurements: Each blade is roughly 15.5 inches long with a 1-inch center hole and a 1.25-inch offset. Measure your current blade length and center hole diameter to confirm.

Key Things to Know

• Quality: These are aftermarket (not OEM Toro). Expect slightly thinner steel than factory blades. They work fine for residential use but may dull faster under heavy use or debris.
• Installation: Direct bolt-on replacement. Use a torque wrench to tighten to 50-60 ft-lbs. The blades are marked “grass side” – install with the sharp edge facing the direction of rotation.
• Gotcha: The center hole and offset are correct for TimeMaster, but if your mower uses a different spindle design (e.g., some older Toro models), these may not seat properly. Always test fit before tightening.
• Pack includes two blades – one for each spindle on the 30-inch deck.

Should You Buy It

If you own a Toro TimeMaster or compatible Exmark with a 30-inch deck and want a budget-friendly mulching blade for regular residential mowing, this is a solid choice. Skip it if you need OEM durability for commercial use, heavy debris, or if your mower uses a non-standard blade pattern.