Reliable Aftermarket Parts Snow Plow Blade Guides 36" Orange Universal Marker Kit with Hardware

What It Is

This is a universal snow plow blade guide kit designed to mark the edges of a plow blade during use, primarily for residential zero-turn mowers, lawn tractors, or ATV-mounted snow plows. The bright orange markers help operators see blade width in snowy conditions, reducing the risk of hitting curbs, landscaping, or other obstacles.

Fitment & Compatibility

This kit is universal, but fitment depends on your blade’s width and mounting points. Before buying, measure your plow blade’s width—the 36-inch markers are intended for blades 36–42 inches wide. Check that your blade has flat, accessible mounting surfaces (typically the top edge or rear flange) with enough clearance for the included hardware. This kit is not brand-specific; it works with most aftermarket or OEM blade setups, but avoid it if your blade has curved or recessed edges that prevent a secure mount. Verify bolt hole spacing—the hardware fits standard 1/4-inch or 5/16-inch holes; if your blade uses metric or non-standard fasteners, you may need to drill or adapt.

Key Things to Know

• Quality: Made from durable, UV-resistant plastic that holds up to cold and impact, but the included hardware is basic zinc-plated steel—consider upgrading to stainless bolts if you operate in salt or wet conditions.
• Installation: Easy, typically under 15 minutes. Drill pilot holes if your blade lacks pre-drilled spots; use a center punch to prevent bit walking. Markers mount with two bolts each—tighten evenly to avoid cracking the plastic.
• Common Gotcha: The 36-inch length assumes a centered mount. If your blade is wider or narrower, reposition the markers inward/outward to match actual blade corners. Test clearance before full tightening—markers should not interfere with blade pivot or lift mechanism.
• Visibility: Orange color fades over time in direct sun; a light coat of UV-resistant spray paint can extend life.

Should You Buy It

Get this kit if you need a cheap, universal way to boost plow blade visibility on a residential tractor or ATV plow, and you’re comfortable drilling a few holes. Skip it if you want a brand-specific, bolt-on solution for a commercial plow with pre-drilled mounting—aftermarket universal kits require minor customization. At $29.99, it’s a solid value for occasional home use.