QWORK Plastic Boundary Wire Stakes, 200 Pcs, 3.35in, Black, Bayonet Tip, Garden Edging, Lawn Nails, Wire Pegs, Landscape Anchoring Spikes, Pet Fence, Mower Compatible

What It Is

These are plastic stakes designed to secure low-voltage boundary wire (like invisible pet fence or robot mower guide wire) into soil. They’re for any setup where you need to pin wire along lawn edges, garden beds, or pathways—not a mower engine part.

Fitment & Compatibility

• Wire gauge: Fits wire up to about 3mm (0.12in) diameter. Check your boundary wire thickness—thicker wire may not seat fully.
• Stake length: 3.35in (85mm) – works in soft to moderately firm soil, but not rocky or heavily compacted ground.
• Bayonet tip: Designed for hand-pressing into turf; no tool needed. Not suitable for concrete or hard clay without pre-drilling.
• Universal: No brand-specific fitment. Works with any robotic mower or pet fence system using standard boundary wire (e.g., Husqvarna, Worx, Landroid, Petsafe). Not for securing mower decks or blades.

Key Things to Know

• Material: Plastic—UV-resistant but can become brittle in extreme cold. Avoid hammering; press gently to prevent snapping.
• Installation: Push straight down by hand. For hard soil, wet the area or use a pilot hole (e.g., screwdriver). Spacing depends on wire curve tightness—typically every 12–24 inches on straight runs, closer on turns.
• Quantity: 200 stakes is plenty for a typical 0.25–0.5 acre lot. Overbuying isn’t needed unless you have complex layouts.
• Common gotcha: Stakes can pull out in loose, sandy soil after heavy rain. Use longer stakes or heavier anchors in those conditions.

Should You Buy It

Yes, if you’re installing or replacing boundary wire for a robotic mower or pet fence on standard lawn soil. At $17.47 for 200 stakes, it’s a solid value for the quantity, but skip if you need metal stakes for rocky ground or concrete.