q&p 3 Pieces Spindle Assembly Bracket Replaces 117-7267 117-7439 285-923 14311 117-7268 Fits 42" 50" Timecutter 2011 SS5000 SS4200 MX5000 Models

What It Is

This is a 3-piece spindle assembly bracket set designed to replace the OEM spindle units on select 42" and 50" Timecutter zero-turn mowers. It mounts the blade, pulley, and bearings to the cutting deck, enabling blade rotation and deck engagement.

Fitment & Compatibility

Check these before buying:

• Deck size & model years: Fits 42" and 50" decks on 2011-era Timecutter models (SS5000, SS4200, MX5000). Not for 54" or older 2010 decks.
• OEM cross-references: Replaces 117-7267, 117-7439, 285-923, 14311, and 117-7268. Verify your current spindle part number matches one of these.
• Measure bolt pattern: Center-to-center mounting holes should be 3.625". Measure your existing spindle base before ordering.
• Spindle shaft diameter: Accepts a 5/8" shaft blade. Confirm your blade arbor size.
• Deck thickness: Works with decks up to 1/8" thick. If your deck is thicker, you may need longer bolts.

Key Things to Know

• Build quality: These are aftermarket units, not OEM Toro. Some users report slightly looser bearing tolerances than OEM but generally hold up well for residential use.
• Installation difficulty: Moderate. Requires removing the deck, belt, pulley, and old spindle. You’ll need a socket set, breaker bar, and possibly a puller for stuck pulleys.
• Common gotcha: The included bolts may be too short for thicker decks. Have M10-1.5 x 30mm bolts on hand just in case.
• Grease fittings: These spindles have zerk fittings – grease them before first use and every 25 hours to extend life.

Should You Buy It

If you own a 42" or 50" 2011 Timecutter and need to replace worn spindles without paying OEM prices, this set is a solid budget option. It works best for residential mowing with moderate use. Avoid if you run a commercial operation or need exact OEM fit without any adjustment.