Parts Camp 15x6.00-6nhs Lawn Mower Tires and Wheels with 3/4" Bushing and 3" Centered Hub, Rubber Pneumatic Tire for Husqvarna Craftsman Riding Mowers (2 Packs)

What It Is

This is a set of two 15x6.00-6 NHS pneumatic tires mounted on wheels with a 3/4" bushing and 3" centered hub. They’re designed as a direct replacement for front or rear tires on many Husqvarna, Craftsman, and other riding lawn mowers, typically used on residential zero-turns, lawn tractors, and garden tractors.

Fitment & Compatibility

Before buying, verify these three things:

• Tire size: Must be 15x6.00-6 (15" outer diameter, 6" wide, 6" rim). Check your current tire sidewall for this exact marking.
• Hub and bushing: The wheel has a 3/4" bushing (fits a 3/4" axle) and a 3" centered hub. Measure your axle diameter and hub center-to-center bolt spacing (if bolted on). This works for most Craftsman/Husqvarna models with 3/4" axles (e.g., LT1000, LT2000, YTH series).
• Rim offset: Centered hub means the wheel sits evenly. Compare to your old wheel’s offset—if your mower uses an offset wheel (e.g., deep-dish for clearance), these may not fit without rubbing.
• OEM vs aftermarket: This is an aftermarket replacement, not OEM. Common OEM part numbers to cross-reference: 532194092, 532195140, 532198040. Check your manual.

Key Things to Know

• Quality vs price: Customers report decent tread life for residential use, but not for heavy commercial mowing. The rubber is softer than OEM—expect faster wear on pavement.
• Installation: No special tools needed. Remove old wheel, slide on new one, and secure with the existing lug nut or cotter pin. May need a wrench for axle nuts. Takes about 10 minutes per wheel.
• Common gotchas: The 3" hub may not clear some mower decks with tight wheel wells. Also, the included bushing is 3/4"—if your axle is 5/8" or 1", you’ll need a different bushing (not included). Check your axle size with a ruler before ordering.
• Air pressure: These are NHS (not for highway service) tires. Inflate to 12-15 PSI max; overinflating can cause premature wear or blowouts on rough terrain.

Should You Buy It

If you need a budget-friendly, easy-to-install replacement for worn-out tires on a residential Craftsman or Husqvarna rider, and you’ve confirmed your axle size (3/4") and hub spacing (centered, 3"), this is a solid value. Skip it if you have a zero-turn with odd offset wheels or need heavy-duty commercial tires—look for a higher ply rating instead.