Pack of 100 WirePEG Securing Pegs for Boundary Wire for robotic lawnmowers kompatible with Gardena Husqvarna Worx Bosch

What It Is

These are 100 plastic securing pegs designed to anchor the boundary wire for robotic lawnmowers. They’re used to lay the guide or perimeter wire along the edge of your lawn, keeping it flush with the ground so the mower can follow it without tripping or cutting the wire.

Fitment & Compatibility

• Works with any robotic mower brand that uses a standard 1.5–2.5mm diameter boundary wire, including Gardena, Husqvarna, Worx, Bosch, Flymo, McCulloch, and most others.
• No model-specific restrictions – these pegs fit all common wire gauges used in robotic mower installations.
• Peg dimensions: typically ~3 inches long, with a U-shaped slot that grips the wire. Check your existing pegs for similar size; these are slightly thicker than some OEM pegs, so they may feel tighter in hard soil.
• Aftermarket part – not OEM, but functionally identical for most installations. No warranty impact on your mower.

Key Things to Know

• Installation difficulty: Easy – just push into soft soil by hand. For hard or dry ground, pre-drill with a small screwdriver or use a rubber mallet to avoid breaking pegs.
• Quality note: Plastic is sturdy but can snap if hammered in frozen or rocky soil. Work in mild weather or use a pilot hole.
• Common gotcha: Pegs sit about 1/2 inch above ground. If you mow low (under 1 inch), the mower blades may clip them. Keep pegs at least 2 inches from the mowing path or recess them slightly.
• Quantity: 100 pegs covers roughly 100–150 feet of wire (1 peg per 1–1.5 feet). For larger yards, you’ll need more.

Should You Buy It

If you’re installing a robotic mower boundary wire from scratch or replacing lost/broken pegs, this pack is a solid, cost-effective choice. It works across all major brands and is easy to install in normal soil. Skip it if your ground is extremely rocky or clay-heavy (you’ll need metal stakes) or if you prefer a completely flush, invisible installation.