Oregon 67-020 Lawn & Garden Tire Snow Chains With 2-Link Spacing

What It Is

The Oregon 67-020 is a set of 2-link ladder-style tire snow chains designed for lawn and garden tractors, providing traction on snow and ice without damaging turf. They are intended for use on rear tires up to 20 inches tall and 8 inches wide.

Fitment & Compatibility

Before buying, measure your rear tire’s height (max 20 inches) and width (max 8 inches). These chains fit tires with a section width of about 6–8 inches and a rim diameter of 7–8 inches. Check your mower’s deck clearance—chains add roughly 1 inch of tire width, so ensure at least 2 inches of clearance between the tire and the deck or frame. They are aftermarket and work with most brands (EGO, John Deere, Craftsman, etc.) but not zero-turn mowers with tight rear fenders. No OEM-specific fitment required.

Key Things to Know

• Quality: 2-link spacing is lighter duty than 4-link; adequate for occasional snow on flat terrain, but may slip on steep slopes or deep snow.
• Installation: Moderate difficulty—requires laying chains flat, driving over them, and hooking tensioners. Watch for chain twist; re-tighten after first few feet of driving.
• Gotcha: These chains are not self-tightening—you must manually adjust tension after a short run to prevent slapping or damage to the tire sidewall.
• Durability: Zinc-plated steel resists rust, but links can snap if overtightened or used on rough pavement.

Should You Buy It

Buy if you have a standard lawn tractor with rear tire clearance and need basic traction for light snow on flat driveways or paths. Skip if you have zero-turn mowers, tight deck clearance, or need heavy-duty performance on deep snow or hills—consider 4-link or studded chains instead. At $40, it’s a budget-friendly winter add-on for occasional use.