Headley Tools 200m/656ft Universal Lawnmower Boundary Wire Contains 50x Lawn Pegs+10x Wire Connectors+9X Titanium Blades Robotic Lawnmower Wire Compatible with Gardena/Husqvarna/Worx

What It Is

This is a complete robotic lawnmower boundary wire kit, including 200 meters of universal wire, 50 lawn pegs, 10 wire connectors, and 9 titanium blades. It’s designed for installing or replacing the perimeter wire for robotic mowers compatible with Gardena, Husqvarna, and Worx models.

Fitment & Compatibility

• Wire gauge: 2.7mm diameter – fits standard robotic mower connectors and terminals.
• Compatible brands: Works with Gardena (e.g., Sileno, R40Li), Husqvarna (e.g., Automower 305, 315, 430X), and Worx (e.g., Landroid models WR130, WR140, WR147). Not guaranteed for other brands like Flymo or McCulloch.
• Length: 200m – sufficient for lawns up to ~600m² (6,500 sq ft) with typical boundary layouts. For larger yards, you’ll need two kits or a longer single wire.
• Blades: Titanium blades fit most robotic mowers with standard 3-blade holders (check your model’s blade hole pattern – 5mm center hole is common). Not compatible with edge-cutting or mulching blades.
• Pegs: 50 pegs – likely enough for a straight run, but tight curves or soft soil may require more. Buy extra pegs separately if your lawn has many obstacles.

Key Things to Know

• Installation difficulty: Moderate. You’ll need to lay the wire in a shallow trench or pin it to the ground; the included pegs are for temporary or soft-soil use. For permanent install, consider burying the wire.
• Wire quality: The 2.7mm PVC-coated wire is UV-resistant, but thinner than OEM Gardena/Husqvarna wire (typically 3.0mm). May work fine, but could be more prone to damage from pets or foot traffic.
• Connectors: The 10 included connectors are push-fit type – they work with most mower docks, but some older Husqvarna models require soldered or screw-terminal connections. Verify your dock’s port type before starting.
• Blade life: Titanium blades last longer than steel, but are not sharp out of the box – you may need to sharpen them before first use. They fit most 3-blade holders, but test one blade before installing all nine.

Should You Buy It

Buy this kit if you need a budget-friendly, all-in-one solution for a new robotic mower installation or a full wire replacement for a compatible Gardena, Husqvarna, or Worx model on a lawn under 600m². Skip it if you have a larger yard, want OEM-grade wire thickness, or need a permanent buried setup – in those cases, buy a thicker, longer wire and separate pegs/connectors.