Green Piece Robotic Mower Blades (30 Pack) Titanium-Coated Stainless Steel – Compatible with Husqvarna Automower, Segway, Navimow, etc - High-Performance Cutting with Screws (Regular Size)

What It Is

A 30-pack of titanium-coated stainless steel blades and screws for robotic mowers, designed to replace worn blades on popular models like Husqvarna Automower, Segway, and Navimow. These are regular-size blades (not XL), intended for periodic swapping to maintain clean cuts on medium to large lawns.

Fitment & Compatibility

• Check blade shape & hole pattern: These are standard “star” or “X” pattern blades (approx. 1.5” long, 0.75” wide) – common on Husqvarna 305/310/315/415X, Segway Navimow H500E/H800E, and many Worx Landroid models.
• Measure your existing blades: If they’re longer or have a different mounting hole (e.g., round vs. star), these won’t fit.
• Screw size: Included M5x12mm screws are standard for most robotic mowers, but verify your model’s screw length (some use M5x10mm or M5x14mm).
• Not for: XL blades (e.g., Husqvarna 450X, 550) or older generic robot mowers with non-standard mounts.

Key Things to Know

• Titanium coating improves edge retention over plain steel – expect 2–3x longer life between swaps, but still replace every 2–4 weeks in heavy use.
• Installation is easy: Lift mower, remove old blade with a Phillips screwdriver, align new blade in the same orientation, and tighten firmly (hand-tight + ¼ turn).
• Common gotcha: Over-tightening can strip the plastic hub. Use moderate torque; if the blade doesn’t spin freely after install, back off slightly.
• 30-pack value: At ~$0.42 per blade, you’re set for 6–12 months of weekly changes – far cheaper than OEM packs.

Should You Buy It

If you own a Husqvarna, Segway, Navimow, or similar robot mower with standard star blades, this pack is a no-brainer for high-volume lawn care. The titanium coating extends blade life, and the included screws eliminate last-minute trips to the hardware store. Skip it if your mower uses XL or proprietary blades.