Extreme Max 5001.6801 Aluminum Ramp Kit for 2x8 Boards – Premium DIY Truck & Trailer Loading System with Heavy-Duty Ramp Ends, Grip Plates & Mounting Hardware

What It Is

The Extreme Max 5001.6801 Aluminum Ramp Kit converts standard 2x8 lumber into a heavy-duty loading ramp for lawn tractors, zero-turn mowers, ATVs, or other wheeled equipment up to 1,500 lbs. It includes ramp ends, grip plates, and mounting hardware for DIY truck/trailer ramp building.

Fitment & Compatibility

• Board size: Requires two 2x8 boards (any length you cut). Width must be exactly 1.5" x 7.25" – pressure-treated or dimensional lumber works.
• Weight capacity: Rated for 1,500 lbs per pair (750 lbs per ramp). Check your mower’s weight (add fuel, attachments). Most residential zero-turns (600–900 lbs) are fine; commercial units over 1,200 lbs may exceed limit.
• Hitch/trailer: Fits standard 2" receiver hitches or trailer tongue brackets. Not designed for truck beds without a hitch mount.
• No mower-specific fit: Universal – works with any machine that fits the ramp width (typically 8–12” tire width per ramp). Measure tire width; if over 8", you may need to space boards further apart.

Key Things to Know

• Installation: Moderate DIY – you cut the 2x8s to your desired length, attach the aluminum ends with included bolts, and add grip plates. No welding or special tools needed, but you’ll need a saw, drill, and wrench.
• Grip plates: Two traction plates included per ramp – place them where tires will roll. They help prevent slipping but aren’t full-length. For wet grass or steep angles, consider adding non-slip tape.
• Durability: Aluminum ends are corrosion-resistant; wood boards will weather over time. Replace boards when they crack or splinter. Hardware is zinc-plated – check for rust annually.
• Gotcha: Ramps are 12” wide total (two 2x8s). If your mower’s rear tires are over 10” wide, you’ll need to use 2x10s or 2x12s – but the kit only fits 2x8s. Verify tire width before buying.

Should You Buy It

Buy this if you already have a trailer or hitch and want a budget-friendly, customizable ramp for loading a typical lawn tractor or zero-turn mower (under 1,500 lbs). It’s ideal for DIYers who don’t want to buy pre-made ramps and prefer to choose their own length. Skip it if you need a full-width, one-piece ramp, have tires wider than 8”, or want a ready-to-use solution with no assembly.