A ANLEOLIFE 1-Pound Commercial Square .080-Inch-by-557-ft String Trimmer Line Donut,with Built-in Line Cutter, Orange

What It Is

A 1-pound donut of commercial-grade .080-inch square trimmer line, 557 feet total, with a built-in cutter on the spool. Designed for heavy-duty trimming on gas, battery, or electric string trimmers that accept universal .080 line.

Fitment & Compatibility

• Line diameter: .080-inch (2.0mm). Fits any trimmer head that accepts this size—check your manual or current line for diameter.
• Universal fit: Works with most brands (Stihl, Echo, Husqvarna, Ryobi, DeWalt, etc.) as long as the head accepts .080 line. Not for heads requiring pre-cut strips.
• Spool vs. loose line: This is loose line on a donut, not a pre-wound spool. You’ll need to cut and load it yourself into a bump-feed or fixed-head trimmer.
• Built-in cutter: The donut has a razor slot for cutting line to length—no separate tool required. Ensure your trimmer head can accept the full 557 feet (most standard heads hold 20–40 feet per load).

Key Things to Know

• Commercial-grade durability: The square profile cuts more aggressively than round line and lasts longer on thick weeds, brush, or edging against hard surfaces.
• Easy installation: Slide the donut onto your trimmer spool, feed line through the eyelet, and use the built-in cutter to trim. No winding needed—just pull and cut.
• Watch for overloading: Don’t jam the head with too much line. Load only enough to fill the spool without binding (typically 20–30 feet per side).
• Compatibility check: Some trimmer heads (especially low-end electric models) may struggle with .080 line due to reduced cutting power. Verify your trimmer’s recommended line size to avoid stalling.

Should You Buy It

Buy this if you have a mid-to heavy-duty trimmer (gas or high-torque electric) and need reliable, long-lasting line for thick grass, weeds, or edging. The built-in cutter and commercial-grade durability make it a solid value for frequent users, but skip it if your trimmer requires thinner line (e.g., .065 or .095) or if you prefer pre-wound spools for convenience.