954-04249A Mower Drive Belt 5/8" x 71" for Troy Bilt Pony Drive Belt, Huskee LT4200, Craftsman T100, T110, T1000, LT1500, LT2000, MTD Riding Mower Replace 754-04249 754-04249A 954-04249

What It Is

This is a replacement drive belt (5/8" wide x 71" long) for the primary drive system on many Troy-Bilt Pony, Huskee LT4200, Craftsman T100/T110/T1000, LT1500/LT2000, and MTD riding mowers. It transfers power from the engine pulley to the transmission, moving the mower forward/reverse.

Fitment & Compatibility

Measure your old belt first – use a cloth tape to confirm length (71") and width (5/8"). Even “same model” mowers can have belt variations depending on the deck size (e.g., 42" vs 46" decks use different belts). Cross-reference your OEM part numbers: 754-04249, 754-04249A, or 954-04249. This belt is aftermarket, not OEM, but matches those specs. Check your mower’s model number (under the seat or on the frame) against the seller’s compatibility list – don’t rely solely on brand name.

Key Things to Know

• Quality: Good value for the price – consistent reviews at 4.7 stars. Not as heavy-duty as OEM, but fine for residential use.
• Installation difficulty: Moderate. You’ll need to remove the deck, release belt tension, and route around pulleys. A diagram from your manual or online helps.
• Common gotcha: This belt is for the drive (movement), not the deck (blades). Don’t confuse them – deck belts are shorter and narrower.
• Stretch-in period: Expect slight initial stretch; re-tension after 2-3 hours of use if your mower has an adjustable tensioner.

Should You Buy It

If you have a Troy-Bilt Pony, Huskee LT4200, or compatible Craftsman/MTD riding mower that uses a 71" x 5/8" drive belt, this is a solid, budget-friendly replacement. It’s not for heavy commercial use, but for regular lawn care it offers reliable performance at a fraction of OEM cost. Double-check your measurements and model number, and you’re set.