954-04249A Drive Belt Replacement for Troy Bilt Pony 954-04249 MTD Huskee Craftsman 13AN77XS093 754-04249 754-04249A CMXGZAM501006 490-501-M006 490-501-Y006 /70.90 inches/Aramid Cord

What It Is

This is a 70.90-inch aramid cord drive belt for Troy-Bilt Pony, MTD, Huskee, and Craftsman lawn tractors. It transfers power from the engine pulley to the transmission, enabling forward/reverse motion.

Fitment & Compatibility

Check these before buying:

• Model numbers: Fits Troy-Bilt Pony 13AN77XS093, Craftsman CMXGZAM501006, and MTD/Huskee models using OEM belts 954-04249, 754-04249, 754-04249A, 490-501-M006, or 490-501-Y006.
• Deck size: Common on 42-inch and 46-inch decks, but verify your specific model—belt length is 70.90 inches, not deck belt length.
• OEM vs aftermarket: This is a replacement, not OEM. Measure your old belt end-to-end (flat, no tension). If it’s 70.9 inches, it’s a match.
• Cross-check: Confirm your tractor’s model plate (under seat or hood) lists one of the compatible numbers above.

Key Things to Know

• Quality: Aramid cord is stronger than standard rubber—good for heavy use, but not as durable as Kevlar OEM belts.
• Installation: Moderate difficulty. You’ll need to remove the deck or mule drive, and possibly a tensioner pulley. Watch for belt routing diagrams online specific to your model.
• Common gotcha: This is a drive belt, not a deck belt. Don’t confuse it with the blade engagement belt—check your manual.
• Tension: If your mower slips after install, the belt may be slightly longer than OEM. Adjust the tensioner or check pulley alignment.

Should You Buy It

Buy if you need a budget-friendly replacement for a worn Troy-Bilt Pony or Craftsman drive belt and you’ve confirmed your model uses the 70.9-inch length. It’s fine for residential mowing, but skip it if you have a commercial-use machine or want OEM durability—spend more on a genuine MTD belt.