8TEN Mower Spindle for Toro Z480 ZX480 48-Inch Deck 111726 114568 108-7165

What It Is

This is a replacement mower spindle assembly for Toro Z480 and ZX480 zero-turn mowers with a 48-inch deck. It drives the blade rotation and supports the blade housing, designed for commercial or residential mowing use.

Fitment & Compatibility

• Exact fit: Toro Z480 and ZX480 models with 48-inch deck (not 42" or 52").
• OEM cross-references: Replaces Toro part numbers 111726, 114568, and 108-7165.
• Check before buying: Measure the existing spindle shaft diameter (should be 1 inch) and bolt pattern (typically 4-bolt, 3-inch center). Verify your deck has the same spindle mounting hole spacing.
• Aftermarket note: This is an 8TEN aftermarket part, not OEM Toro. It should match OEM specs but confirm your existing spindle is the same design (some decks have variations).

Key Things to Know

• Quality: 8TEN is a reputable aftermarket brand; bearings are sealed and pre-lubricated. Expect similar lifespan to OEM if installed correctly.
• Installation difficulty: Moderate. Requires removing the blade, pulley, and retaining hardware. You’ll need a socket set, torque wrench, and possibly a puller for the pulley.
• Gotcha: The spindle housing may have a different grease fitting location than your original—check clearance before tightening. Also, ensure the blade bolt is torqued to spec (typically 40-50 ft-lbs) to avoid vibration.
• Warranty: Check 8TEN’s warranty policy; some aftermarket parts have limited coverage compared to OEM.

Should You Buy It

If you own a Toro Z480 or ZX480 with a 48-inch deck and need a reliable, cost-effective replacement for a worn or damaged spindle, this 8TEN part is a solid choice. It’s cheaper than OEM, rated highly by users, and fits without modification. Avoid if you demand OEM-only parts or if your deck has non-standard spindle dimensions.