8TEN Deck Spindle for Toro 50 inch Timecutter Z4200 Z4220 Z4235 Z5020 Titan ZX5000 110-6866 117-1192 3 Pack

What It Is

This is a set of three replacement deck spindles for 50-inch Toro TimeCutter and Titan zero-turn mowers. The spindles drive the blades and support the pulley system; they’re a common wear item after 200–400 hours of use, especially if you mow over rough ground or hit debris.

Fitment & Compatibility

Check these before buying:

• Deck width: Only for 50-inch fabricated decks. Not for 42-inch, 44-inch, 54-inch, or 60-inch models.
• Specific models: Fits Toro TimeCutter Z4200, Z4220, Z4235, Z5020 and Titan ZX5000 with 50-inch decks. Also fits some ZX5200 and ZX5400 models—verify your deck part number.
• OEM cross-reference: Replaces Toro OEM part numbers 110-6866 and 117-1192. If your original spindle has a different number (e.g., 117-1193, 110-6867), this set will not fit.
• Physical check: Measure the spindle housing diameter (approx. 2.5 inches) and shaft length (approx. 2.75 inches). Bolt pattern is 3-bolt, 2.5-inch center-to-center. Confirm yours matches before ordering.

Key Things to Know

• Quality vs. OEM: These are aftermarket spindles. Build quality is solid for the price, but the bearings may not last as long as genuine Toro spindles (expect 150–250 hours vs. 300+ OEM).
• Installation difficulty: Moderate. You’ll need a socket set, jack/stands to lift the mower, and a puller for old spindles if they’re rusted. Allow 1–2 hours for all three.
• Common gotcha: The mounting bolts are often seized. Soak them in penetrating oil (e.g., PB Blaster) 24 hours before removal. Use a breaker bar, not an impact gun, to avoid stripping the deck.
• Lubrication: These spindles come pre-greased. No need to add grease before install, but check for a zerk fitting—if present, grease every 50 hours.

Should You Buy It

If you own a 50-inch Toro TimeCutter or Titan ZX5000 and need to replace all three spindles at once, this 3-pack is a cost-effective choice—roughly half the price of OEM. It’s best for budget-conscious DIYers who can handle a moderate install and don’t need industrial-duty longevity. For commercial mowing or high-hour use, stick with genuine Toro spindles.