72 x 4 x 0.75" Snow Plow Blade Cutting Edge Fits for ATV UTV, Black

What It Is

This is a heavy-duty cutting edge (wear bar) for ATV/UTV snow plow blades. It bolts to the bottom of your plow to scrape against pavement or gravel, protecting the main blade from wear. Designed for 72-inch wide plows on utility vehicles, not for lawn mowers.

Fitment & Compatibility

• Width: 72 inches – must match your plow blade width exactly. Measure your current edge or blade from bolt hole to bolt hole.
• Thickness: 0.75 inches – check your plow’s bolt length. Thicker than standard 0.5-inch edges, so you may need longer bolts (not included).
• Height: 4 inches – standard height; fits most universal plow frames.
• Mounting holes: Not specified in listing. Before buying, measure hole spacing (center-to-center) and diameter on your existing edge. Common patterns are 6-inch or 8-inch centers. If mismatched, you’ll need to drill new holes (steel is hard).
• Brand/model: No OEM fitment listed. This is a universal aftermarket part. Confirm your ATV/UTV plow brand (e.g., Warn, KFI, Moose, Polaris) uses a straight 72-inch edge with flat mounting.

Key Things to Know

• Material: Likely hardened steel (not stainless). It will rust over time but is durable for snow/sand abrasion. Not for concrete scraping long-term.
• Installation: Moderate difficulty. You’ll need a socket set, possibly a breaker bar for old rusted bolts. If holes don’t align, a drill with a cobalt bit is required.
• Weight: ~50-60 lbs. Handle with care; two people recommended for alignment.
• Reversibility: Check if the edge is symmetrical (same bolt pattern both sides). If so, you can flip it to extend life – but only if holes are centered.

Should You Buy It

Buy this if you have a 72-inch universal ATV/UTV plow and need a thick, budget-friendly replacement edge for heavy snow or gravel scraping. Skip it if your plow has a non-standard bolt pattern (e.g., curved or offset edges) or if you need a corrosion-resistant edge for salt-heavy environments – this steel will rust. With only one review, treat it as a low-risk generic part; measure your current edge carefully before ordering.