532130969 Drive Replacement Belt for Ariens AYP Husqvarna Poulan 21546080, 130969, 2042 LS, 2146 XLS, 2246 LS, 2348 LS, GTH 2654 T, LGT 2554, LGT 2654, LGT 2554

What It Is

This is a drive belt (OEM part 532130969) that transfers power from the engine pulley to the transmission on specific mid-size lawn tractors from Ariens, AYP, Husqvarna, and Poulan. It’s designed for machines with 42–48 inch decks and hydrostatic or manual gear drives.

Fitment & Compatibility

Before buying, confirm your machine’s model number and deck size. This belt fits:

• Ariens: 2042 LS, 2146 XLS, 2246 LS, 2348 LS
• AYP/Husqvarna: GTH 2654 T, LGT 2554, LGT 2654, LGT 2554
• Poulan: Models using belt 21546080 or 130969

Check these:

• Deck width: Must be 42–48 inches (belt length varies by deck size; measure your old belt if unsure).
• OEM vs aftermarket: This is a genuine Husqvarna/OEM belt. Aftermarket versions may differ in length or width by ±1/8 inch—measure yours with the belt off and tension relaxed.
• Belt dimensions: Approx. 1/2 inch wide x 96.5 inches long (double-check your manual for exact specs).
• Pulley condition: Worn or bent pulleys can cause premature belt failure—inspect before installing.

Key Things to Know

• Quality: OEM construction with Kevlar-reinforced cords for longer life than many cheap aftermarket belts.
• Installation difficulty: Moderate. You’ll need to remove the deck (2–4 bolts) and route the belt around the engine pulley, idler, and transmission pulley. A diagram helps—take a photo before removing the old belt.
• Common gotchas:
  • The belt must be routed inside the idler pulley tensioner arm, not over it.
  • If your machine has a manual PTO clutch, the belt goes under the clutch pulley.
  • Torque the deck bolts to 20–25 ft-lbs; overtightening can warp the deck.
• Warranty: 90-day limited (check seller policy; some aftermarket belts offer longer coverage).

Should You Buy It

Buy this belt if you need a direct OEM replacement for an Ariens, Husqvarna, or Poulan tractor with a 42–48 inch deck and want reliable, factory-spec fit and durability. It’s a solid choice for DIY maintenance—just verify your model number and belt length first to avoid returns.