4951003MA Mulching Mower Blades for Murray Scotts Stanley 42 Inch Deck 095100E701 0951000MA 95100E701 425303x92B 425603x99A 42" Mower Replace 095100E701 095100E701MA 495100 3-IN-1 Mower Blades 2 Pack

What It Is

This is a 2-pack of 42-inch mulching blades designed for Murray, Scotts, and Stanley riding mowers with a 42-inch stamped deck. They replace OEM part numbers 095100E701, 495100, and 95100E701, and are built for 3-in-1 operation (mulch, bag, discharge) when used with the correct deck plug.

Fitment & Compatibility

Before buying, confirm your mower’s deck size is exactly 42 inches—measure from blade tip to blade tip. These blades fit Murray/Scotts/Stanley models with part numbers ending in 425303x92B, 425603x99A, or OEM 095100E701MA and 495100. Check your current blade’s center hole diameter (should be 1-inch) and overall length (about 21 inches) to match. They are aftermarket replacements, not OEM, but match the original geometry. Verify your spindle pattern—these use a 5-point star center hole.

Key Things to Know

• Quality vs OEM: Aftermarket steel may be slightly thinner than OEM, but user reviews (4.4/5) report good durability for residential use.
• Installation: Easy bolt-on job; use a torque wrench to 30-40 ft-lbs and recheck after first mow. No special tools beyond a socket and blade removal tool.
• Common gotcha: These are mulching blades with a higher lift curve—they’ll clog in wet grass. Only use for dry, average-height lawns (2-4 inches). For bagging, switch to standard lift blades.
• Balance: Each blade must be balanced before install; use a blade balancer to avoid vibration that can damage the spindle.

Should You Buy It

Buy these if you have a 42-inch Murray, Scotts, or Stanley rider and want affordable mulching performance for a standard residential lawn. They’re a solid value at $24.35 for a 2-pack, but skip them if you routinely cut wet grass or need OEM-grade steel for heavy commercial use.