42 Inch Deck Rebuild Kit Replace for Huskee LT4200, Fit for Craftsman T1000 T110 T1400 T1200 T100, for Troy Bilt TB42 TB2246, with 2 Spindles 618-06991 918-06991, 2 Blades 742-04308, 1 Belt 954-04060

What It Is

This is a 42-inch deck rebuild kit designed to replace worn spindles, blades, and belt on select Huskee, Craftsman, and Troy-Bilt lawn tractors. It’s intended for routine maintenance to restore cutting performance on mid-size residential mowers with a 42-inch fabricated or stamped deck.

Fitment & Compatibility

Before buying, verify your mower’s deck size is exactly 42 inches (measured blade tip to blade tip). This kit is listed for:

• Huskee: LT4200
• Craftsman: T1000, T110, T1400, T1200, T100
• Troy-Bilt: TB42, TB2246

It includes two spindles (OEM #618-06991/918-06991), two blades (OEM #742-04308), and one belt (OEM #954-04060). Check your current spindle part numbers and belt length—if your mower uses a different belt (e.g., 954-04059 or 954-04061), this kit won’t fit. Measure blade length (should be ~20-21 inches) and center hole diameter (typically 1 inch or 7/8 inch). Aftermarket parts may vary slightly in casting quality; ensure spindle housing aligns with your deck’s bolt pattern (usually 4-bolt).

Key Things to Know

• Quality: Spindles are aftermarket, not OEM. Some users report minor casting imperfections or looser bearing tolerances. Inspect and grease before install.
• Installation difficulty: Moderate. Requires removing deck, swapping spindles, blades, and belt. Need socket set, torque wrench, and possibly a puller for stubborn spindle housings.
• Common gotchas: Blade bolts may be reverse-threaded on some models—check your manual. Belt tension must be adjusted properly; too loose slips, too tight wears pulleys. Spindle bolts often require Loctite.
• Belt length: Measure old belt end-to-end. If yours is slightly longer or shorter (common on different deck generations), this belt may not track correctly.

Should You Buy It

If your 42-inch Huskee, Craftsman, or Troy-Bilt has worn spindles (noise, wobble) and dull blades, this kit offers a cost-effective one-stop refresh. It’s right for DIY owners comfortable with deck removal and basic mechanical work. Avoid if you need OEM precision for commercial use or if your deck uses non-standard spindle spacing or belt length.