40" Tow Behind Dethatcher, Pull Behind Lawn Dethatcher with 20 Rust-Proof Tines & Heavy-Duty Tires, Tow Behind Rake for Yard & Garden Thatch and Dead Grass Removal, Fits Lawn Tractors, ATV, UTV, Black

What It Is

This is a 40-inch tow-behind dethatcher designed to remove thatch, dead grass, and debris from lawns. It works with lawn tractors, ATVs, and UTVs, making it suitable for medium to large yards.

Fitment & Compatibility

Before buying, check your tow vehicle’s hitch type and height. This dethatcher uses a standard 1-7/8-inch hitch pin (included), but the frame height is fixed at roughly 12 inches from ground to hitch point. Measure your tractor or ATV’s hitch height – if it’s higher than 13 inches, you’ll need a drop hitch adapter. The 40-inch working width is best for lawns with clear paths at least 44 inches wide to avoid obstacles. It’s not designed for zero-turn mowers with low ground clearance (under 4 inches) or tight turning radii. No OEM-specific fitment – it’s universal, but heavier tractors (300+ lbs) handle it better on slopes.

Key Things to Know

• Tine material: The 20 tines are rust-proof steel but are thin (about 1/8-inch diameter). They’ll flex on hard soil or rocks – avoid thick thatch over 1 inch deep on first pass.
• Assembly: Takes 20–30 minutes; tools needed: two wrenches (9/16 and 7/16 inch). The tines bolt onto a fixed bar – no adjustable depth settings.
• Tire quality: Heavy-duty 13x5.00-6 tires are pneumatic but not puncture-proof. Check air pressure before each use (20-25 PSI recommended) to prevent sidewall damage.
• Common gotcha: The dethatcher tends to bounce on uneven ground at speeds over 5 mph. Stay under 3-4 mph for consistent tine contact.

Should You Buy It

Buy this if you have a lawn tractor or ATV with a standard hitch and a yard under 1 acre with light to moderate thatch (under 1/2 inch thick). Skip it if you need adjustable depth, have rocky or clay-heavy soil, or require a unit for commercial use – the tines and frame won’t hold up to heavy-duty or frequent pulling.