20x8.00-8 Lawn Mower Tires with Rim,20x8x8" Tubeless Tractor Tires, 2-Pack Tire and Wheel Assembly,3.5" Offset Hub,3/4" Bushing,4 Ply for Riding Mowers Lawn Tractors（No Keyway)

What It Is

This is a 2-pack of 20x8.00-8 lawn mower tires pre-mounted on rims, designed as a direct replacement for rear or front wheels on riding mowers and lawn tractors. They’re tubeless, 4-ply rated, and suited for residential mowing on turf, dirt, and light gravel.

Fitment & Compatibility

Before buying, confirm these three things:

• Tire size: Must be 20x8.00-8 (20" diameter, 8" wide, 8" rim). This is common on many riding mowers (e.g., John Deere D100 series, Husqvarna YTH, Craftsman LT models), but always check your current tire sidewall.
• Hub offset: These have a 3.5" offset (center of rim to mounting face). Measure your old wheel’s offset – a mismatch can cause rubbing on the mower deck or frame.
• Bushing & axle: They come with a 3/4" bushing (reduces center hole from 1" to 3/4"). If your axle is 1", you’ll need a different bushing. No keyway – these rely on friction fit; not for mowers with a keyed axle (e.g., some older MTD models).

Check your mower’s deck clearance and wheel well space. Measure from axle center to nearest obstruction.

Key Things to Know

• No keyway means no positive drive lock – if your mower uses a key to transmit power (common on drive wheels), these tires may slip under load. Best for free-rolling (steering) wheels or mowers with a clamping hub.
• 4-ply rating is adequate for residential use, but not for heavy commercial cutting or rocky terrain. Expect moderate tread life.
• Installation is straightforward – remove old wheel, slide on new one, tighten lug nuts. No tire mounting or balancing needed.
• Valve stem position can vary – if you have a tight wheel well, check that the stem won’t hit the frame or deck before tightening.

Should You Buy It

This is a solid budget-friendly option if you need a quick swap for a 20x8.00-8 tire on a riding mower with a 3/4" or 1" axle and no keyway drive requirement. It’s ideal for steering wheels or mowers that use a clamping hub. Avoid if you need a keyed drive wheel or a higher ply rating for rough terrain.