187292 192870 532187281 532187292 567253301 587819701 587125401 for Husqvarna yth22v46 yth24v48 Spindle 187292 Mandrel Assembly 42" 46" 48" 54" Mower Deck Spindle for Craftsman 2200 567253301 1 Pack

What It Is

This is a replacement spindle/mandrel assembly for the cutting blades on Husqvarna and Craftsman lawn tractors with 42", 46", 48", or 54" mower decks. It drives the blade via the deck belt and includes the spindle housing, pulley, and bearings pre-assembled.

Fitment & Compatibility

• Check your deck size and model. This spindle is listed for Husqvarna YTH22V46 and YTH24V48, and Craftsman 2200 series. It also fits many other Husqvarna, Craftsman, Poulan, and McCulloch models with the same deck pattern.
• Cross-reference OEM part numbers: 187292, 192870, 532187281, 532187292, 567253301, 587819701, 587125401. Verify one of these matches your current part.
• Measure your spindle: The pulley diameter is typically 4.5" with a 5/8" hex or round shaft. Confirm blade bolt pattern (usually 1-3/8" or 1-5/8" center hole) and shaft length (approx. 2.75"–3").
• Deck size matters: This spindle is not universal—some 42" decks use a different spindle. If your deck has three spindles, this is typically for the left or right (outer) position; center spindles may differ.

Key Things to Know

• Quality vs. OEM: This is an aftermarket part at a low price. The bearings are sealed but may not last as long as OEM Husqvarna/Craftsman spindles. Expect 1–3 seasons of residential use.
• Installation difficulty: Moderate. You’ll need a socket set and possibly a puller to remove the old spindle. The hardest part is often accessing the bolts under the deck—raise the mower or remove the deck for easier access.
• Common gotchas: The pulley may not match the original belt groove width exactly—check belt fit before tightening. Also, the mounting holes may not align perfectly on some decks; slight filing may be needed.
• Pack contents: You get one spindle assembly (housing, pulley, bearing, shaft) with no blade or hardware. Reuse your original blade bolt and lock washer.

Should You Buy It

If you need a quick, budget-friendly spindle for a Husqvarna or Craftsman tractor used on a typical residential lawn, this is a solid choice. It’s not built for heavy commercial use, but for the price it’s a straightforward fix that gets your mower cutting again. Skip it if you want OEM longevity or need a center spindle for a three-spindle deck.