15x6.00-6 Flat Free Lawn Mower Tire and Wheel, Comes with Tire Saver Ramp, 15x6-6nhs Riding Mowers Lawn Tire and Wheel with 3/4" Bearing, 3" Centered Hub, 2 Pack

What It Is

This is a pair of 15x6.00-6 flat-free (never-flat) tires mounted on steel wheels with a 3/4" bore bearing and a 3" centered hub. Designed for riding mowers and lawn tractors, they eliminate flat tires and are ideal for properties with thorns, nails, or rough terrain.

Fitment & Compatibility

Before buying, verify these three measurements on your current tire/wheel:

• Tire size: Must be 15x6.00-6 (15" diameter, 6" wide, 6" rim). Common on many Craftsman, Husqvarna, John Deere, MTD, and Troy-Bilt models.
• Wheel bore: 3/4" bearing. Measure the axle shaft diameter—must be exactly 3/4". If your axle is 5/8" or 1", this won’t fit without an adapter.
• Hub center: 3" centered hub. Measure from the center of the hub to the outer edge of the mounting flange. Some mowers use offset hubs (e.g., 2" or 4")—this is centered, so check clearance with your mower deck and frame.
• Bolt pattern: Not applicable here—these use a single center bearing, not lug nuts. Just slides onto the axle and secures with a washer and cotter pin or clip.

Tip: Measure your old tire’s overall diameter and wheel width. These are flat-free, so they are slightly stiffer and may not fit under low-clearance decks.

Key Things to Know

• Quality: Solid rubber construction—no air to lose, but they ride harder than pneumatic tires. Expect some vibration on uneven ground.
• Installation: Easy for DIYers. Remove old wheel, slide new one on, secure with existing hardware. No tire mounting or inflation needed.
• Tire Saver Ramp: Included—a plastic ramp to help mount the tire onto the wheel if needed, but these come pre-assembled.
• Common gotchas: The 3/4" bearing may be loose on some axles; use a bushing if needed. The centered hub can cause rubbing against the mower frame if your original had offset—measure carefully.

Should You Buy It

Buy this if you’re tired of fixing flats on a riding mower used in thorny or debris-filled yards, and you’ve confirmed the 15x6.00-6 size, 3/4" axle, and centered hub fit your machine. Skip it if you need a cushioned ride (e.g., for a zero-turn on smooth lawns) or have an offset hub requirement.