140218 532140218 Drive Belt for Craftsman Husqvarna Poulan AYP 1/2"x 84" Mower

What It Is

The 140218 (532140218) drive belt is a 1/2-inch wide by 84-inch long V-belt that transfers power from the engine pulley to the mower deck blades. It’s designed for mid-size riding lawn mowers with 42- to 50-inch cutting decks, primarily Craftsman, Husqvarna, Poulan, and AYP (American Yard Products) models.

Fitment & Compatibility

Before buying, confirm three things:

1. Measure your old belt: Lay it flat and measure the total length (center-to-center on the outside). Must be exactly 84 inches. Width must be 1/2 inch. If yours is 85 inches or 5/8 inch wide, this won’t fit.
2. Check your model number: This belt fits many Craftsman LT1000/2000/3000 series, Husqvarna YTH/YTA series, Poulan Pro, and AYP-branded mowers. Look for a model tag under the seat or on the frame—common compatible models include Craftsman 917.27xxxx, Husqvarna YTH22V46, and Poulan PPB46.
3. OEM vs aftermarket: This is an OEM replacement (original part number 140218, also 532140218). It matches factory specs. Avoid generic “universal” belts that may be slightly off in length or width.

Key Things to Know

• Quality: Good OEM-grade rubber with Kevlar cord reinforcement. Expect 2-3 seasons of normal residential use. Not for commercial zero-turn mowers.
• Installation difficulty: Moderate. You’ll need to remove the deck (or at least the belt guard), release tension from the idler pulley, and route the belt around all pulleys. A belt routing diagram is often on the deck or in the manual.
• Common gotcha: The belt will be tight—use a wrench to rotate the idler pulley arm to relieve tension. Don’t force it over the pulley edge; you can damage the belt cords.
• Symptom check: If your blades won’t engage, or the belt slips/squeals, this belt is likely worn or stretched. Replace both the belt and the idler pulley if the pulley feels rough or wobbly.

Should You Buy It

Yes, if you have a Craftsman, Husqvarna, Poulan, or AYP riding mower with a 42-50 inch deck and your old belt measures exactly 84 inches x 1/2 inch. It’s a reliable OEM replacement at a fair price—just confirm your model number first to avoid a return.