130794 128285 Spindle Rebuild Kit Fit for Craftsman/Husqvarna/Poulan 42 Inch Deck LT1000 LT2000 LTX1000 Riding Mower, with Pulley 129861 153535, 95 1/2 Inch Belt 144959

What It Is

This spindle rebuild kit (part #130794/128285) restores the rotating assembly on 42-inch Craftsman, Husqvarna, and Poulan riding mower decks. It includes two pulleys (129861/153535), a 95.5-inch belt (144959), and the bearings/spacers needed to rebuild a worn-out spindle—saving you from replacing the entire deck housing.

Fitment & Compatibility

• Deck size: 42-inch cutting deck only. Measure your deck’s bolt pattern (typically 4-bolt, 3.5-inch center-to-center) before ordering.
• Models: Fits Craftsman LT1000, LT2000, LTX1000 series; Husqvarna YTH1542, YTH1842; Poulan PP1542, PB1842, and similar. Verify your mower’s model number on the frame tag.
• OEM vs aftermarket: This is an aftermarket kit. It matches OEM part numbers 130794, 128285, 129861, 153535, and 144959. Check your current spindle assembly matches these numbers.
• Belt length: The 95.5-inch belt fits decks with a 5-inch center pulley and 42-inch cutting path. Measure your old belt end-to-end (not looped) to confirm.

Key Things to Know

• Quality note: Bearings are sealed, but some users report they wear faster than OEM. Inspect pulleys for wobble after installation.
• Installation difficulty: Moderate. You’ll need a socket set, puller for the old bearings, and a bench vise. Plan 1–2 hours if you’ve done spindle work before; 3+ hours if not.
• Common gotcha: The pulley bolt torque is critical—over-tightening can warp the pulley. Use 25–30 ft-lbs and a thread locker.
• Belt routing: The 95.5-inch belt goes around the engine pulley, both spindle pulleys, and the idler. Snap a photo before removing the old belt.

Should You Buy It

If your mower deck has a noisy or wobbly spindle and you’re comfortable with basic mechanical work, this kit is a cost-effective fix—about half the price of OEM. It’s right for DIYers who want to keep a 42-inch Craftsman/Husqvarna/Poulan running without replacing the entire deck. Skip it if you need OEM durability for heavy commercial use or prefer a pre-assembled spindle.