11x4.00-5 Lawn Mower Tires – Flat Free Zero Turn Front Tires with 3/4" Bearing Extra 5/8" Bearing, 3.4"-5" Hub, 11x4.00-5 Tire Fits Generators & Lawn Mowers, 350LBS (Yellow,2 pack)

What It Is

This is a 2-pack of flat-free (solid) 11x4.00-5 tires designed for zero-turn mower front wheels, generators, and other small utility equipment. They eliminate punctures and air maintenance, rated for 350 lbs per tire.

Fitment & Compatibility

Before buying, verify these three measurements:

• Tire size: Must be 11x4.00-5 (11" diameter, 4" wide, 5" rim). Measure your current tire’s sidewall stamp.
• Hub width: The hub is 3.4" wide, but includes a 3/4" bearing and an extra 5/8" bearing. Ensure your axle spindle matches either 3/4" or 5/8" diameter. If your spindle is 1/2" or 1", these won’t fit without adapter bushings.
• Bolt pattern: Not listed—check if your wheel uses a bolt-on hub or a single-center bearing. These are bearing-type wheels, not bolt-on. They fit most zero-turn mowers (e.g., Cub Cadet, Husqvarna, John Deere) with 5" rims and the correct bearing size, but always measure your existing wheel’s bearing inner diameter and spindle diameter.

Key Things to Know

• No flat tires – solid rubber means zero air maintenance, but ride is stiffer and vibration higher on rough terrain.
• Installation – simple swap: remove old tire, slide new one onto spindle, secure with washer and cotter pin or nut. No tire machine needed.
• Weight & balance – at 350 lbs rating, these are fine for most residential zero-turn mowers. Heavier commercial decks may exceed capacity, especially on slopes.
• Extra bearing included – the 5/8" bearing is a bonus, but double-check if your spindle needs it. Many mowers use 3/4" – if yours is 5/8", you’re set.

Should You Buy It

If you’re tired of fixing flats on your zero-turn mower’s front tires and your spindle is 3/4" or 5/8", these are a solid, affordable upgrade. They’re best for flat lawns and light-duty use; avoid if you need a cushioned ride on bumpy ground or have a heavy commercial mower.